Excalibur Professional Products
Used to Service Your Projects
Epoxy 100 (LX)
Epoxy 100 (LX)
A 2-component, 100% solids, self-leveling and high-build epoxy floor coating. It is designed to be used as a protective floor coating on concrete, over an existing epoxy coating or to create metallic/decorative flooring systems. It can also be used as the binder component for resurfacing or patching surfaces exposed to severe and aggressive industrial environments.
Epoxy 155 (LX)
Epoxy 155 (LX)
A 2-component, 100% solids, self-leveling and high-build epoxy floor coating. It is designed to be used as a protective floor coating on concrete, over an existing epoxy coating or to create metallic/decorative flooring systems. It can also be used as the binder component for resurfacing or patching surfaces exposed to severe and aggressive industrial environments (1 day floor).
301 (LX) Urethane
301 (LX) Urethane
Aliphatic 3 component Urethane Satin Finish (Low Sheen). 301 is a three-component, high-solids, aliphatic polyurethane coating designed as a UV-stable, chemical-resistant topcoat. It gives a satin appearance and demonstrates excellent physical properties and resistance to industrial traffic. It can be applied over an epoxy primer or used to coat an existing epoxy or urethane coating. This product is also ecological and contains no VOCs.
Poly - SB (SM)
Poly - SB (SM)
This product is a 2-component, Acrylic-Modified Solvent-based Polyurethane exterior sealer used as a protective or maintenance wear surface over stamped concrete, decorative concrete, pavers, concrete stains, etc. with superior adhesion, abrasion resistance, gloss retention, stain resistance versus typical low solids single component solvent-based acrylic sealers. Available in both Gloss & Low Sheen finishes.
Polyasparttic 275
(LX )275
Polyasparttic 275
(LX )275
A solvent based, two component, VOC compliant, Aliphatic Polyaspartic Polyurea Coating System. It was specifically developed to be used a as UV stable topcoat finish where installation downtime is limited. It is recommended for areas where a thin clear coat is desired over colored coatings or vinyl flake broadcast systems. 275 provides superior abrasion, chemical, and UV resistance with a crystal clear glossy finish. Environmental Compliance, Low Odor, UV Stability.
Polyaspartic 1000 (SM)
Polyaspartic 1000 (SM)
A 2-Component, Fast-Cure, High-Performance, 76% Solids Aliphatic Polyaspartic coating with a gloss finish which yields a Resilient, U.V. Stable and Abrasion Resistant film with very good splash and chemical spill resistance properties for application to a variety of substrates including, but not limited to concrete, wood and metal.
Primer - Water Barrier (LX ) 160
Primer - Water Barrier (LX ) 160
a 100% solid, two component epoxy coating designed for controlling moisture vapor emissions on new or deteriorated concrete floors. This coating is recommended to be applied as a primer in areas of high humidity or on wet concrete. When applied at a thickness of 18 mils, it exceeds ASTM F3010 product requirements for vapor permeance. This coating will withstand moisture vapor emission rates up to 25lbs./24hrs./1000 ft2 when applied properly.
Primer - Water Barrier (LX) 165 Quick Dry
Polyasparttic 275
(LX )275
a 100% solid, two component epoxy coating designed for controlling moisture vapor emissions on new or deteriorated concrete floors. This coating is recommended to be applied in areas of high humidity or on wet concrete. When applied at a thickness of 18 mils, it exceeds ASTM F3010 product requirements for vapor permeance. This coating will withstand moisture vapor emission rates up to 25lbs./24hrs./1000 ft2 when applied properly.
Floor Stain Colors
Floor Stain Colors
A decorative stain for concrete surfaces. Stain Color Floor is water submersible, alkali, weather and UV light resistant. These stains require a top coat and are compatible with solvent-based, water-based, single and two component products, including but not limited to urethanes, acrylics and epoxy sealers.
Cracks Filler
Cracks Filler
(LX) 135 is a super fast curing two component, sag resistant structural epoxy system designed to repair vertical or horizontal cracks. It has excellent adhesion to concrete, masonry, wood, metal and plastics
Metallic Flooring
Metallic Flooring
Metallic Epoxy Systems are great for office buildings, residential interiors, garages, bars, retail stores and many other venues. No two metallic floors look alike, their appearances are completely dependent upon the artisans abilities and design ideas. The finished look is a smooth, glass like finish that has a unique and subtle reflective sparkle. These coatings create a glossy and deep-looking floor that can contain a variety of colors and visual effects.